Headlight Cleaner Motor Inspection


  1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

Headlight Cleaner Motor -- Inspection



1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

  1. Disconnect the headlight cleaner washer motor and pump assembly connector.

    HINT:
    Make sure that the headlight cleaner washer motor and pump assembly is installed to the windshield washer jar assembly.

  1. Fill the windshield washer jar assembly with washer fluid.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Headlight Cleaner Motor Inspection

  1. Connect the positive (+) lead of the battery to terminal 2 of the headlight cleaner washer motor and pump assembly, and the negative (-) lead to terminal 1.

  1. Check that washer fluid flows from the windshield washer jar assembly.

    OK:
    Washer fluid flows from the windshield washer jar assembly.
    If the result is not as specified, replace the headlight cleaner motor and pump assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Headlight Cleaner Motor and Pump Assembly)