Washer Motor (For Rear Side) -- Removal |
1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 13 clips and upper radiator support seal.
2. REMOVE RADIATOR GRILLE |
![]() |
Put protective tape around the radiator grille.
Remove the 4 screws.
Detach the 8 claws and remove the radiator grille.
Text in Illustration *1 Protective Tape
3. REMOVE FRONT BUMPER COVER |
Remove the 2 screws.
- HINT:
- Use the same procedure for the screws on the other side.
![]() |
Remove the 2 screws.
Text in Illustration *1 Screw *2 Bolt A *3 Bolt B
![]() |
Remove the 2 bolts labeled A and 2 bolts labeled B.
Put protective tape around the front bumper cover.
Text in Illustration *1 Protective Tape
![]() |
Remove the 4 clips.
Detach the 16 claws and remove the front bumper cover.
- NOTICE:
- Do not hold the middle of the front bumper cover, as it may become reformed.
w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 3 connectors.
w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
Disconnect the connector.
w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
Disconnect the 2 connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
4. REMOVE FRONT WHEEL |
5. REMOVE FRONT FENDER MUDGUARD RH |
![]() |
Remove the 2 clips and 4 screws.
Remove the front fender mudguard.
6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Remove the screw.
![]() |
Remove the 13 grommets and front fender splash shield sub-assembly RH.
- HINT:
- The grommets need to be replaced with new ones because they will break when they are removed.
7. DRAIN WASHER FLUID |
Disconnect the washer hose from the hose of the windshield washer motor and pump assembly, and then drain the washer fluid.
- HINT:
- Use a container to collect the washer fluid.
![]() |
8. REMOVE WASHER INLET SUB-ASSEMBLY |
Detach the claw and remove the washer inlet sub-assembly.
![]() |
9. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
w/o Headlight Cleaner System:
Disconnect the connector.
![]() |
w/ Headlight Cleaner System:
Disconnect the 3 connectors.
![]() |
Remove the 3 screws.
![]() |
Detach the guide and remove the windshield washer jar assembly.
![]() |
10. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY |
Disconnect the connector.
Remove the rear washer motor and pump assembly from the packing of the windshield washer jar assembly.
![]() |