Wiper Switch Installation


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

  2. INSTALL UPPER STEERING COLUMN COVER

  3. INSTALL LOWER STEERING COLUMN COVER

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Wiper Switch -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

  1. Attach the claw to install the windshield wiper switch assembly.

  1. w/ Rain Sensor:
    Connect the connector.

  1. w/o Rain Sensor:
    Connect the 2 connectors.



2. INSTALL UPPER STEERING COLUMN COVER

  1. Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.



3. INSTALL LOWER STEERING COLUMN COVER

  1. Attach the 2 claws to install the lower steering cover.

  1. for Power Tilt and Power Telescopic:
    Install the screw.

  1. Turn the steering wheel to the right and left as necessary to install the 2 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).