Wiper Switch -- Removal |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 2. REMOVE LOWER STEERING COLUMN COVER |
Turn the steering wheel to the left as necessary to remove the screw.
 |
Turn the steering wheel to the right as necessary to remove the screw.
 |
for Power Tilt and Power Telescopic:
Remove the screw.
 |
Detach the 2 claws and remove the lower steering column cover.
 |
| 3. REMOVE UPPER STEERING COLUMN COVER |
Detach the 4 clips and claw to remove the upper steering column cover.
 |
| 4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
w/ Rain Sensor:
Disconnect the connector.
 |
w/o Rain Sensor:
Disconnect the 2 connectors.
 |
Detach the claw and remove the windshield wiper switch assembly.