Outer Mirror Switch Inspection


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

  2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

Outer Mirror Switch -- Inspection



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Mirror Switch Inspection

  1. Inspect the outer mirror switch.

    1. Select "L" on the left/right adjustment switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      9 (MLV) - 11 (B)
      6 (M+) - 12 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      9 (MLV) - 12 (E)
      6 (M+) - 11 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      10 (MLH) - 11 (B)
      6 (M+) - 12 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      10 (MLH) - 12 (E)
      6 (M+) - 11 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

    3. Select "R" on the left/right adjustment switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      8 (MRV) - 11 (B)
      6 (M+) - 12 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      8 (MRV) - 12 (E)
      6 (M+) - 11 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      7 (MRH) - 11 (B)
      6 (M+) - 12 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      7 (MRH) - 12 (E)
      6 (M+) - 11 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

  1. Inspect the switch illumination.
    Apply battery voltage between the terminals of the light, and check the operation of the light.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 15 (ILL+)
    Battery negative (-) → Terminal 16 (ILL-)
    		Light comes on
    If the result is not as specified, replace the outer mirror switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Mirror Switch Assembly)


2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Mirror Switch Inspection

  1. Inspect the outer mirror switch.

    1. Select "L" on the left/right adjustment switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      9 (MLV) - 11 (B)
      6 (M+) - 12 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      9 (MLV) - 12 (E)
      6 (M+) - 11 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      10 (MLH) - 11 (B)
      6 (M+) - 12 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      10 (MLH) - 12 (E)
      6 (M+) - 11 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

    3. Select "R" on the left/right adjustment switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      8 (MRV) - 11 (B)
      6 (M+) - 12 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      8 (MRV) - 12 (E)
      6 (M+) - 11 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      7 (MRH) - 11 (B)
      6 (M+) - 12 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      7 (MRH) - 12 (E)
      6 (M+) - 11 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

  1. Inspect the retract switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      12 (E) - 14 (MF)
      11 (B) - 13 (MR)
      		Pushed in
      		Below 1 Ω
      12 (E) - 13 (MR)
      11 (B) - 14 (MF)
      		Not pushed in
      		Below 1 Ω
      If the result is not as specified, replace the outer mirror switch assembly.

  1. Inspect the switch illumination.
    Apply battery voltage between the terminals of the light, and check the operation of the light.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 15 (ILL+)
    Battery negative (-) → Terminal 16 (ILL-)
    		Light comes on
    If the result is not as specified, replace the outer mirror switch assembly.
    Text in Illustration
    *1
    		Retract Switch
    *a
    		Component without harness connected
    (Outer Mirror Switch Assembly)