Outer Rear View Mirror Inspection


  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Side Monitor System)

  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Side Monitor System)

  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Side Monitor System)

  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Side Monitor System)

Outer Rear View Mirror -- Inspection



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Side Monitor System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 1 (MV)
    Battery negative (-) → Terminal 9 (M+)
    		Turns upward (A)
    Battery negative (-) → Terminal 1 (MV)
    Battery positive (+) → Terminal 9 (M+)
    		Turns downward (B)
    Battery positive (+) → Terminal 8 (MH)
    Battery negative (-) → Terminal 9 (M+)
    		Turns left (C)
    Battery negative (-) → Terminal 8 (MH)
    Battery positive (+) → Terminal 9 (M+)
    		Turns right (D)
    If the result is not as specified, replace the outer rear view mirror assembly LH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly LH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

    OK:
    Measurement Condition
    		Mirror Position
    		Specified Condition
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Forward position (A)
    		Moves from (A) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Forward position (A)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to forward position (A)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Driving position (C)
    		Moves from (C) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Driving position (C)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to driving position (C)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Retracted position (E)
    		Does not move
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Retracted position (E)
    		Moves from (E) to driving position (C)
    NOTICE:
    1. Disconnect and reconnect the battery between each mirror position check.
    1. Do not apply battery voltage when moving the mirror by hand into each mirror position.
    If the result is not as specified, replace the outer rear view mirror assembly LH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly LH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Mirror Heater:
    Check the mirror heater.

    1. Measure the resistance according to the value (s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      Terminal 4 (+) - Terminal 11 (-)
      		25°C (75°F)
      		3.0 to 3.9 Ω
      If the result is not as specified, replace the outer rear view mirror assembly LH.

    2. Apply battery voltage and check the operation of the mirror heater.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 4 (+)
      Battery negative (-) → Terminal 11 (-)
      		Mirror becomes warm
      HINT:
      It will take a short time for the mirror to become warm.
      If the result is not as specified, replace the outer rear view mirror assembly LH.
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Rear View Mirror Assembly LH)


2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Side Monitor System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 1 (MV)
    Battery negative (-) → Terminal 9 (M+)
    		Turns upward (A)
    Battery negative (-) → Terminal 1 (MV)
    Battery positive (+) → Terminal 9 (M+)
    		Turns downward (B)
    Battery positive (+) → Terminal 8 (MH)
    Battery negative (-) → Terminal 9 (M+)
    		Turns left (C)
    Battery negative (-) → Terminal 8 (MH)
    Battery positive (+) → Terminal 9 (M+)
    		Turns right (D)
    If the result is not as specified, replace the outer rear view mirror assembly RH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly RH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

    OK:
    Measurement Condition
    		Mirror Position
    		Specified Condition
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Forward position (A)
    		Moves from (A) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Forward position (A)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to forward position (A)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Driving position (C)
    		Moves from (C) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Driving position (C)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to driving position (C)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 10 (MF)
    		Retracted position (E)
    		Does not move
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 10 (MF)
    		Retracted position (E)
    		Moves from (E) to driving position (C)
    NOTICE:
    1. Disconnect and reconnect the battery between each mirror position check.
    1. Do not apply battery voltage when moving the mirror by hand into each mirror position.
    If the result is not as specified, replace the outer rear view mirror assembly RH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly RH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Mirror Heater:
    Check the mirror heater.

    1. Measure the resistance according to the value (s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      Terminal 4 (+) - Terminal 11 (-)
      		25°C (75°F)
      		3.0 to 3.9 Ω
      If the result is not as specified, replace the outer rear view mirror assembly RH.

    2. Apply battery voltage and check the operation of the mirror heater.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 4 (+)
      Battery negative (-) → Terminal 11 (-)
      		Mirror becomes warm
      HINT:
      It will take a short time for the mirror to become warm.
      If the result is not as specified, replace the outer rear view mirror assembly RH.
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Rear View Mirror Assembly RH)


3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Side Monitor System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 6 (MV)
    Battery negative (-) → Terminal 5 (M+)
    		Turns upward (A)
    Battery negative (-) → Terminal 6 (MV)
    Battery positive (+) → Terminal 5 (M+)
    		Turns downward (B)
    Battery positive (+) → Terminal 4 (MH)
    Battery negative (-) → Terminal 5 (M+)
    		Turns left (C)
    Battery negative (-) → Terminal 4 (MH)
    Battery positive (+) → Terminal 5 (M+)
    		Turns right (D)
    If the result is not as specified, replace the outer rear view mirror assembly LH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly LH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Retract Mirror:
    For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

    OK:
    Measurement Condition
    		Mirror Position
    		Specified Condition
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Forward position (A)
    		Moves from (A) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Forward position (A)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to forward position (A)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Driving position (C)
    		Moves from (C) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Driving position (C)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to driving position (C)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Retracted position (E)
    		Does not move
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Retracted position (E)
    		Moves from (E) to driving position (C)
    NOTICE:
    1. Disconnect and reconnect the battery between each mirror position check.
    1. Do not apply battery voltage when moving the mirror by hand into each mirror position.
    If the result is not as specified, replace the outer rear view mirror assembly LH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly LH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Mirror heater:
    Check the mirror heater.

    1. Measure the resistance according to the value (s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      Terminal 2 (+) - Terminal 8 (-)
      		25°C (75°F)
      		3.0 to 3.9 Ω
      If the result is not as specified, replace the outer rear view mirror assembly LH.

    2. Apply battery voltage and check the operation of the mirror heater.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 2 (+)
      Battery negative (-) → Terminal 8 (-)
      		Mirror becomes warm
      HINT:
      It will take a short time for the mirror to become warm.
      If the result is not as specified, replace the outer rear view mirror assembly LH.
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Rear View Mirror Assembly LH)


4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Side Monitor System)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 6 (MV)
    Battery negative (-) → Terminal 5 (M+)
    		Turns upward (A)
    Battery negative (-) → Terminal 6 (MV)
    Battery positive (+) → Terminal 5 (M+)
    		Turns downward (B)
    Battery positive (+) → Terminal 4 (MH)
    Battery negative (-) → Terminal 5 (M+)
    		Turns left (C)
    Battery negative (-) → Terminal 4 (MH)
    Battery positive (+) → Terminal 5 (M+)
    		Turns right (D)
    If the result is not as specified, replace the outer rear view mirror assembly RH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly RH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Retract Mirror:
    For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

    OK:
    Measurement Condition
    		Mirror Position
    		Specified Condition
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Forward position (A)
    		Moves from (A) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Forward position (A)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Position between forward position (A) and driving position (C)
    		Moves from (B) to forward position (A)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Driving position (C)
    		Moves from (C) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Driving position (C)
    		Does not move
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to retracted position (E)
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Position between driving position (C) and retracted position (E)
    		Moves from (D) to driving position (C)
    Battery positive (+) → Terminal 3 (MR)
    Battery negative (-) → Terminal 9 (MF)
    		Retracted position (E)
    		Does not move
    Battery negative (-) → Terminal 3 (MR)
    Battery positive (+) → Terminal 9 (MF)
    		Retracted position (E)
    		Moves from (E) to driving position (C)
    NOTICE:
    1. Disconnect and reconnect the battery between each mirror position check.
    1. Do not apply battery voltage when moving the mirror by hand into each mirror position.
    If the result is not as specified, replace the outer rear view mirror assembly RH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly RH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. w/ Mirror Heater:
    Check the mirror heater.

    1. Measure the resistance according to the value (s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      Terminal 2 (+) - Terminal 8 (-)
      		25°C (75°F)
      		3.0 to 3.9 Ω
      If the result is not as specified, replace the outer rear view mirror assembly RH.

    2. Apply battery voltage and check the operation of the mirror heater.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 2 (+)
      Battery negative (-) → Terminal 8 (-)
      		Mirror becomes warm
      HINT:
      It will take a short time for the mirror to become warm.
      If the result is not as specified, replace the outer rear view mirror assembly RH.
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Rear View Mirror Assembly RH)