Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT SEAT ASSEMBLY (for RHD)

  3. REMOVE CONSOLE BOX ASSEMBLY (for RHD)

  4. REMOVE REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

  5. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

  6. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

  7. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  8. REMOVE MAT SET PLATE COVER

  9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  10. REMOVE QUARTER TRIM COVER HOLE LH

  11. REMOVE REAR FLOOR CARPET ASSEMBLY

  12. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  13. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

  14. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

  15. REMOVE QUARTER TRIM POCKET TRAY

  16. REMOVE OUTER LAP BELT ANCHOR COVER

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

  18. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

  19. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

  20. REMOVE FRONT FLOOR CARPET ASSEMBLY

  21. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

Fuel Lid Lock Control Cable Assembly (For 3 Door) -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE FRONT SEAT ASSEMBLY (for RHD)

  1. for Manual Seat:
    Remove the front seat assembly (LandCruiser RM00000465Y00YX.html).

  1. for Walk in Seat:
    Remove the front seat assembly (LandCruiser RM0000046B800AX.html).



3. REMOVE CONSOLE BOX ASSEMBLY (for RHD)

  1. for Automatic Transmission:
    Remove the console box assembly (LandCruiser RM0000046JD008X.html).

  1. for Manual Transmission:
    Remove the console box assembly (LandCruiser RM0000046N6006X.html).

  1. w/ Refrigerated Cool Box:
    Remove the console box assembly (LandCruiser RM0000046MR00KX.html).



4. REMOVE REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

  1. for LH Side:
    Remove the rear No. 1 seat assembly (LandCruiser RM0000046ZI006X.html).

  1. for RH Side:
    Remove the rear No. 1 seat assembly (LandCruiser RM0000046ZN006X.html).



5. REMOVE DOOR SCUFF PLATE ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal

  1. Put protective tape around the door scuff plate.

  1. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


6. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


7. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



8. REMOVE MAT SET PLATE COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal
HINT:
Use the same procedure for all mat set plate covers.

  1. Using a screwdriver, detach the 2 claws and remove the mat set plate cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 5 screws.

  1. Detach the 6 claws and remove the rear floor mat rear support plate.



10. REMOVE QUARTER TRIM COVER HOLE LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 claws and 2 guides and remove the quarter trim cover hole.



11. REMOVE REAR FLOOR CARPET ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the rear floor carpet.



12. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Remove the luggage compartment trim hook by turning it clockwise.



13. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal
HINT:
Use the same procedure for the other tonneau cover holder cap.

  1. Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


14. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal
HINT:
Use the same procedure for the other front deck side trim cover.

  1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


15. REMOVE QUARTER TRIM POCKET TRAY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal

  1. Put protective tape around the quarter trim pocket tray.

  1. Using a screwdriver, detach the 6 claws and 2 guides, and remove the quarter trim pocket tray.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective tape


16. REMOVE OUTER LAP BELT ANCHOR COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure for the other outer lap belt anchor cover.

  1. Detach the 3 claws and remove the outer lap belt anchor cover.



17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the front seat outer belt floor anchor.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

  1. Remove the 3 bolts and 2 screws.



  1. Detach the 9 claws and 12 clips and remove the deck trim side panel.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal



18. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 7 clips.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 claws and 2 guides, pass the rear No. 1 seat belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.



19. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 3 claws.

  1. Remove the fuel lid lock control cable assembly and fuel lid lock open lever sub-assembly.



20. REMOVE FRONT FLOOR CARPET ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. for LHD:

    1. Detach the 4 clamps and fold back the front floor carpet from the floor carpet hooks.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. for RHD:

    1. Detach the 8 clamps and fold back the front floor carpet from the floor carpet hooks.



21. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Turn the cable counterclockwise and remove the cable from the retainer.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Turn the lock retainer counterclockwise and remove the lock retainer.



  1. for LHD:

    1. Using a clip remover, detach the clamp labeled <A>.



    2. Detach the 11 clamps and remove the fuel lid lock control cable.


      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal



  1. for RHD:

    1. Using a clip remover, detach the 3 clamps labeled <A>.



    2. Detach the 11 clamps and remove the fuel lid lock control cable.


      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Door Hatch.Hood.Fuel Lid Lock Control Cable Assembly (For 3 Door) Removal