Relay (W/ Ptc Heater) On-Vehicle Inspection
INSPECT PTC HEATER RELAY (PTC NO. 1, PTC NO. 2 AND PTC NO. 3)
Relay (W/ Ptc Heater) -- On-Vehicle Inspection |
1. INSPECT PTC HEATER RELAY (PTC NO. 1, PTC NO. 2 AND PTC NO. 3) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
3 - 5
| Battery voltage not applied between terminals 1 and 2
| 10 kΩ or higher
|
Battery voltage applied to terminals 1 and 2
| Below 1 Ω
|
- If the result is not as specified, replace the relay.