Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Removal


  1. REMOVE REAR SEAT ASSEMBLY RH

  2. REMOVE REAR SEAT CUSHION MOULDING RH

  3. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) -- Removal


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE REAR SEAT ASSEMBLY RH

  1. Remove the rear seat assembly RH (LandCruiser RM00000468F00QX.html).



2. REMOVE REAR SEAT CUSHION MOULDING RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the screw.

  1. Using a moulding remover, detach the 3 claws.

  1. Detach the 2 guides and remove the rear seat rear cushion moulding LH.



3. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Seat Belt.Seat Belt Warning System.Rear No. 1 Seat Inner Belt Assembly (For 60/40 Split Slide Walk-In Seat Type Rh Side) Removal

  1. Remove the bolt and inner belt.