Power Seat Control Ecu (For Rear No. 2 Seat) Installation


  1. INSTALL FOLD SEAT CONTROL ECU

  2. INSTALL DECK BOARD ASSEMBLY

  3. PERFORM INITIALIZATION

  4. CHECK REAR NO. 2 SEAT

Power Seat Control Ecu (For Rear No. 2 Seat) -- Installation


NOTICE:
  1. If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).
  2. If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).
HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL FOLD SEAT CONTROL ECU

  1. Install the ECU with the 2 nuts.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}

  1. Connect the 2 connectors.



2. INSTALL DECK BOARD ASSEMBLY

  1. Attach the 4 clips.

  1. Install the deck board with the 2 bolts.



3. PERFORM INITIALIZATION
NOTICE:
  1. If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).
  2. If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).


4. CHECK REAR NO. 2 SEAT

  1. Check the power seat operation (LandCruiser RM000003GYJ00MX.html).