Power Seat Control Ecu (For Rear No. 2 Seat) Removal


  1. REMOVE DECK BOARD ASSEMBLY

  2. REMOVE FOLD SEAT CONTROL ECU

Power Seat Control Ecu (For Rear No. 2 Seat) -- Removal


NOTICE:
  1. If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).
  2. If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).
HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE DECK BOARD ASSEMBLY

  1. Operate the No. 2 fold seat switch and fold down the 2 seatbacks.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Detach the 4 clips and remove the deck board.



2. REMOVE FOLD SEAT CONTROL ECU


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 2 connectors.

  1. Remove the 2 nuts and ECU.