Front Seatback Heater (For Walk In Seat Type) -- Installation |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the RH side.
| 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY RH |
 |
Set the seatback heater with the name stamp side facing the seatback cover.
Text in Illustration *1 Tack Pin *2 Seatback Cover *3 Seatback Heater *4 Name Stamp
Install the seatback heater with new tack pins.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.
- HINT:
- The number of hog rings differs according to seat type.
Text in Illustration *A for Type A *B for Type B *1 Hog Ring Pliers - -
Attach the 4 claws to install the 2 headrest supports.
w/ Front Seat Side Airbag:
Connect the seatback cover bracket to the seatback pad.
Install the seatback cover bracket to the seat frame with the nut.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
- NOTICE:
- After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.
 |
Close the 2 fasteners, and then close the seatback cover.
Text in Illustration *A for Cloth Seat *B for Leather Seat
Using hog ring pliers, install 3 new hog rings.
Text in Illustration *1 Hog Ring Pliers
 |
Connect the seat heater connector and attach the wire harness clamp.
Install the rubber band to the seat cushion spring.
| 3. INSTALL FRONT SEAT ASSEMBLY |
Install the front seat assembly (LandCruiser RM0000046B600AX.html).