Climate Control Seat Switch (W/ Climate Control Seat System) -- Inspection |
| 1. INSPECT REFRESHING SEAT SWITCH LH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (BLLH) - 11 (SW-) Switch off 1.5 to 2.8 kΩ Switch on (HI) 29 to 54 Ω
- HINT:
- As the dial is being turned, the resistance changes gradually.
Text in Illustration *a Component without harness connected
(Refreshing Seat Switch LH)
 |
Apply battery voltage to the switch connector, and check that the refreshing seat switch LH illuminates.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 3 (ILL+)
Battery negative (-) → 5 (ILL-)Illuminates
Apply battery voltage to the switch connector, and check that the refreshing seat switch LH indicator illuminates.
- OK:
Measurement Condition Switch Condition Specified Condition Battery positive (+) → 8 (IG)
Battery negative (-) → 10 (E)Switch on Indicator illuminates
| 2. INSPECT REFRESHING SEAT SWITCH RH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (BLRH) - 11 (SVSG) Switch off 1.5 to 2.8 kΩ Switch on (HI) 29 to 54 Ω
- HINT:
- As the dial is being turned, the resistance changes gradually.
Text in Illustration *a Component without harness connected
(Refreshing Seat Switch RH)
 |
Apply battery voltage to the switch connector, and check that the refreshing seat switch RH illuminates.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 3 (ILL+)
Battery negative (-) → 5 (ILL-)Illuminates
Apply battery voltage to the switch connector, and check that the refreshing seat switch RH indicator illuminates.
- OK:
Measurement Condition Switch Condition Specified Condition Battery positive (+) → 8 (IG)
Battery negative (-) → 10 (E)Switch on Indicator illuminates