Seat. Rear No. 2 Seat Assembly (For Power Seat Type Lh Side) Inspection

INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH
INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH
INSPECT NO. 3 SEAT LEG ASSEMBLY LH
INSPECT NO. 2 SEAT LEG ASSEMBLY (for RH Side)

Rear No. 2 Seat Assembly (For Power Seat Type Lh Side) -- Inspection

NOTICE:

After performing this inspection, be sure to perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (LandCruiser RM000001YWR010X.html).

1. INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH

Check the operation of the seatback frame.
1. Apply battery voltage to the power seat motor, and check that the seatback moves smoothly as follows.
  OK:
  Measurement Condition
  Specified Condition
  Battery positive (+) → 3
  Battery negative (-) → 4
  Front
  Battery positive (+) → 4
  Battery negative (-) → 3
  Rear
  If the result is not as specified, replace the No. 3 seatback frame LH.
  Text in Illustration
  *a
  Component without harness connected
  (No. 3 Seatback Frame LH)
  
  Front
  
  Rear

Text in Illustration
*a	Component without harness connected (No. 3 Seatback Frame LH)
	Front
	Rear

2. INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH

Check the operation of the seatback frame.
1. Apply battery voltage to the power seat motor, and check that the seatback moves smoothly as follows.
  OK:
  Measurement Condition
  Specified Condition
  Battery positive (+) → 3
  Battery negative (-) → 4
  Front
  Battery positive (+) → 4
  Battery negative (-) → 3
  Rear
  If the result is not as specified, replace the No. 3 seatback frame RH.
  Text in Illustration
  *a
  Component without harness connected
  (No. 3 Seatback Frame RH)
  
  Front
  
  Rear

Text in Illustration
*a	Component without harness connected (No. 3 Seatback Frame RH)
	Front
	Rear

3. INSPECT NO. 3 SEAT LEG ASSEMBLY LH

Check the operation of the seat leg.
1. Apply battery voltage to the power seat motor, and check that the seat leg arm moves smoothly as follows.
  OK:
  Measurement Condition
  Specified Condition
  Battery positive (+) → 3
  Battery negative (-) → 4
  Front
  Battery positive (+) → 4
  Battery negative (-) → 3
  Rear
  If the result is not as specified, replace the No. 3 seat leg assembly.
  Text in Illustration
  *1
  Seat Leg Arm
  *a
  Component without harness connected
  (No. 3 Seat Leg Assembly LH)
  
  Front
  
  Rear

Text in Illustration
*1	Seat Leg Arm
*a	Component without harness connected (No. 3 Seat Leg Assembly LH)
	Front
	Rear

4. INSPECT NO. 2 SEAT LEG ASSEMBLY (for RH Side)

Check the operation of the seat leg.
1. Apply battery voltage to the power seat motor, and check that the seat leg arm moves smoothly as follows.
  OK:
  Measurement Condition
  Specified Condition
  Battery positive (+) → 3
  Battery negative (-) → 4
  Front
  Battery positive (+) → 4
  Battery negative (-) → 3
  Rear
  If the result is not as specified, replace the No. 2 seat leg assembly.
  Text in Illustration
  *1
  Seat Leg Arm
  *a
  Component without harness connected
  (No. 2 Seat Leg Assembly)
  
  Front
  
  Rear

Measurement Condition	Specified Condition
Battery positive (+) → 3 Battery negative (-) → 4	Front
Battery positive (+) → 4 Battery negative (-) → 3	Rear