Airbag Cut-Off Indicator Light Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

  4. REMOVE TELLTALE LIGHT ASSEMBLY

Airbag Cut-Off Indicator Light -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (LandCruiser RM000003YMD00TX.html)
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION
HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 4 clips and remove the instrument panel finish panel end RH.



4. REMOVE TELLTALE LIGHT ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 screws and light.