Airbag Cut-Off Switch Installation


  1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY

  2. INSTALL INSTRUMENT SIDE PANEL RH

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. CHECK SRS WARNING LIGHT

Airbag Cut-Off Switch -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY

  1. Attach the 2 claws to install the cutoff switch cylinder.



2. INSTALL INSTRUMENT SIDE PANEL RH

  1. Connect the connector.

  1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


4. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (LandCruiser RM000000XFD0N3X.html).