Key Reminder Warning System Data List / Active Test

  1. READ DATA LIST

Key Reminder Warning System -- Data List / Active Test



READ DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the tester, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Key Unlock Warning SW
    		Unlock warning switch signal / ON or OFF
    		ON: Key in ignition key cylinder
    OFF: No key in ignition key cylinder
    		-
    FR Door Courtesy
    		Front door courtesy light switch RH*1 signal / ON or OFF
    		ON: Front door RH closed
    OFF: Front door RH open
    		-
    FL Door Courtesy
    		Front door courtesy light switch LH*2 signal / ON or OFF
    		ON: Front door LH closed
    OFF: Front door LH open

    1. *1: for RHD
    2. *2: for LHD