Generator -- Removal |
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need too be initialized after the cable is reconnected.
| 3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE |
Detach the 3 clamps and disconnect the intake mass air flow meter connector.
 |
Detach the 4 clamps.
 |
Loosen the hose clamp and remove the air cleaner cap sub-assembly with air cleaner hose.
| 4. REMOVE FAN AND GENERATOR V BELT |
Use the hexagonal part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.
- NOTICE:
- When removing the fan and generator V belt, do not use the bolt of the idle pulley.
- HINT:
- After removing the fan and generator V belt, move the tensioner upward to the maximum amount.
 |
| 5. REMOVE GENERATOR ASSEMBLY |
Disconnect the connector from the generator assembly.
 |
Remove the terminal cap.
Remove the nut and disconnect the wire harness from terminal B.
Remove the 3 bolts and generator assembly.
 |