Blind Spot Monitor Sensor Removal


  1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

  2. REMOVE JACK BOX HOLE COVER

  3. REMOVE REAR BUMPER BAR PLATE

  4. REMOVE BACK DOOR CHECK

  5. REMOVE NO. 1 REAR BUMPER PLATE

  6. REMOVE REAR QUARTER PANEL MUDGUARD LH

  7. REMOVE REAR QUARTER PANEL MUDGUARD RH

  8. REMOVE REAR BUMPER COVER

  9. REMOVE BLIND SPOT MONITOR SENSOR LH

  10. REMOVE BLIND SPOT MONITOR SENSOR RH

Blind Spot Monitor Sensor -- Removal


NOTICE:
  1. Avoid any impact to the blind spot monitor sensor.
  2. Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.


1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. For vehicles with a spare tire installed to the underbody, remove the spare tire.

  1. Remove the 4 nuts.

  1. Remove the 4 bolts and pintle hook.



2. REMOVE JACK BOX HOLE COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Blind Spot Monitor Sensor Removal

  1. Using a screwdriver, detach the 2 claws and remove the jack box hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE REAR BUMPER BAR PLATE

  1. Put protective tape around the rear bumper bar plate.



  1. Detach the 14 claws and remove the rear bumper bar plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Blind Spot Monitor Sensor Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


4. REMOVE BACK DOOR CHECK
NOTICE:
  1. If the back door check is detached from a ball joint, do not reuse it as the connection with the ball joint will be loose, resulting in the back door check falling off.
  2. If the back door check is detached from a ball joint, it becomes non-reusable. Therefore, do not detach the back door check from a ball joint unless replacing it.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Using a clip remover, detach the clip and remove the back door check with back door lower damper stay bracket.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the wire harness clamp.

  1. Remove the 3 bolts and back door check with back door lower damper stay bracket.



5. REMOVE NO. 1 REAR BUMPER PLATE

  1. Put protective tape around the No. 1 rear bumper plate.



  1. Detach the 10 claws and 10 guides and remove the No. 1 rear bumper plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Blind Spot Monitor Sensor Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


6. REMOVE REAR QUARTER PANEL MUDGUARD LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 clips and 5 screws.

  1. Remove the rear quarter panel mudguard.



7. REMOVE REAR QUARTER PANEL MUDGUARD RH
HINT:
Use the same procedure described for the LH side.


8. REMOVE REAR BUMPER COVER

  1. Put protective tape around the rear bumper cover.

  1. Remove the 2 clips and 6 bolts.

  1. Detach the 14 claws.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:
    Disconnect the 2 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 2 connectors.



  1. Remove the rear bumper cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Blind Spot Monitor Sensor Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


9. REMOVE BLIND SPOT MONITOR SENSOR LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Remove the 3 nuts and blind spot monitor sensor LH.



10. REMOVE BLIND SPOT MONITOR SENSOR RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Remove the 3 nuts and blind spot monitor sensor RH.