Ultrasonic Sensor (For Rear) Removal


  1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

  2. REMOVE JACK BOX HOLE COVER

  3. REMOVE REAR BUMPER BAR PLATE

  4. REMOVE BACK DOOR CHECK

  5. REMOVE NO. 1 REAR BUMPER PLATE

  6. REMOVE REAR QUARTER PANEL MUDGUARD LH

  7. REMOVE REAR QUARTER PANEL MUDGUARD RH

  8. REMOVE REAR BUMPER COVER (for 5 Door)

  9. REMOVE REAR BUMPER COVER (for 3 Door)

  10. REMOVE ULTRASONIC SENSOR CLIP

  11. REMOVE NO. 1 ULTRASONIC SENSOR

  12. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

Ultrasonic Sensor (For Rear) -- Removal



1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. For vehicles with a spare tire installed to the underbody, remove the spare tire.

  1. Remove the 4 nuts.

  1. Remove the 4 bolts and pintle hook.



2. REMOVE JACK BOX HOLE COVER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Ultrasonic Sensor (For Rear) Removal

  1. Using a screwdriver, detach the 2 claws and remove the jack box hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


3. REMOVE REAR BUMPER BAR PLATE

  1. Put protective tape around the rear bumper bar plate.



  1. Detach the 14 claws and remove the rear bumper bar plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Ultrasonic Sensor (For Rear) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


4. REMOVE BACK DOOR CHECK
NOTICE:
  1. If the back door check is detached from a ball joint, do not reuse it as the connection with the ball joint will be loose, resulting in the back door check falling off.
  2. If the back door check is detached from a ball joint, it becomes non-reusable. Therefore, do not detach the back door check from a ball joint unless replacing it.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts.

  1. Using a clip remover, detach the clip and remove the back door check with back door lower damper stay bracket.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the wire harness clamp.

  1. Remove the 3 bolts and back door check with back door lower damper stay bracket.



5. REMOVE NO. 1 REAR BUMPER PLATE

  1. Put protective tape around the No. 1 rear bumper plate.



  1. Detach the 10 claws and 10 guides and remove the No. 1 rear bumper plate.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Ultrasonic Sensor (For Rear) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


6. REMOVE REAR QUARTER PANEL MUDGUARD LH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 clips and 5 screws.

  1. Remove the rear quarter panel mudguard.



7. REMOVE REAR QUARTER PANEL MUDGUARD RH
HINT:
Use the same procedure described for the LH side.


8. REMOVE REAR BUMPER COVER (for 5 Door)

  1. Put protective tape around the rear bumper cover.

  1. Remove the 2 clips and 6 bolts.

  1. Detach the 14 claws.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:
    Disconnect the 2 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 2 connectors.



  1. Remove the rear bumper cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Ultrasonic Sensor (For Rear) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


9. REMOVE REAR BUMPER COVER (for 3 Door)

  1. Put protective tape around the rear bumper cover.

  1. Remove the 2 clips and 7 bolts.

  1. Detach the 10 claws.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:
    Disconnect the 2 connectors.

  1. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:
    Disconnect the 2 connectors.



  1. Remove the rear bumper cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Ultrasonic Sensor (For Rear) Removal


    Text in Illustration
    *1
    		Protective Tape
    		-
    		-


10. REMOVE ULTRASONIC SENSOR CLIP


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure to remove the ultrasonic sensor clip on the other side.

  1. Detach the 4 claws and remove the ultrasonic sensor clip.



11. REMOVE NO. 1 ULTRASONIC SENSOR


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.

  1. Disconnect the connector.

  1. Detach the 2 claws and remove the No. 1 ultrasonic sensor.



12. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
HINT:
Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.

  1. Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer.