Side Monitor System -- How To Proceed With Troubleshooting |
- HINT:
- Use the following procedure to troubleshoot the side monitor system.
- *: Use the GTS.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
Measure the voltage with the engine switch off.
- Standard voltage:
- 11 to 14 V
|
3.CHECK NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM |
for Navigation Receiver Type:
Refer to the navigation system (LandCruiser RM0000011BN0THX.html).for Radio and Display Type:
Refer to the audio and visual system (LandCruiser RM000003YVF01HX.html).Result Result Proceed to Navigation system or Audio and visual system is normal A Navigation system is abnormal B Audio and visual system is abnormal C
|
| ||||
|
| ||||
|
4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Use the GTS to check if the CAN communication system is functioning normally.
- for LHD with Entry and Start System: LandCruiser RM000001RSO0C5X.html
- for LHD without Entry and Start System: LandCruiser RM000001RSO0BYX.html
- for RHD with Entry and Start System: LandCruiser RM000001RSO0BZX.html
- for RHD without Entry and Start System: LandCruiser RM000001RSO0C0X.html
Result Result Proceed to CAN DTC is not output A CAN DTC is output (for LHD with Entry and Start System) B CAN DTC is output (for LHD without Entry and Start System) C CAN DTC is output (for RHD with Entry and Start System) D CAN DTC is output (for RHD without Entry and Start System) E - for LHD with Entry and Start System: LandCruiser RM000001RSO0C5X.html
|
| ||||
|
| ||||
|
| ||||
|
| ||||
|
5.CHECK FOR DTC* |
Check for DTCs and note any codes that are output (LandCruiser RM000003XM2023X.html).
Clear the DTC (LandCruiser RM000003XM2023X.html).
Check for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.
- NOTICE:
- The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the side monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.
System Proceed to Parking Assist Monitor System LandCruiser RM0000035DB07DX.html Wide View Front Monitor System LandCruiser RM000003EB400YX.html Result Result Proceed to DTC is not output A DTC is output B
|
| ||||
|
6.PROBLEM SYMPTOMS TABLE |
Refer to the Problem Symptoms Table (LandCruiser RM0000057K800GX.html).
Result Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B
|
| ||||
|
7.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (LandCruiser RM0000057K800GX.html).
|
8.ADJUST, REPAIR OR REPLACE |
|
9.CONFIRMATION TEST |
| |||||
|
---|