Wide View Front Monitor System -- Terminals Of Ecu |
PARKING ASSIST ECU |

Disconnect the I6 and I7 parking assist ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I6-1 (+B) - I6-4 (GND1) L - W-B Power source signal Always 10 to 16 V I6-4 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω I6-8 (IG) - I6-4 (GND1) L - W-B IG Power source signal Engine switch on (IG) 10 to 16 V Engine switch off Below 1 V I6-9 (ACC) - I6-4 (GND1) P - W-B ACC Power source signal Engine switch on (ACC) 10 to 16 V Engine switch off Below 1 V I7-8 (BLSW) - I6-4 (GND1) L - W-B Front and side monitor main switch power source signal Engine switch on (IG), wide view front and side monitor switch on 10 to 16 V Reconnect the I6 and I7 parking assist ECU connectors.
Measure the voltage, resistance and waveform according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I6-10 (TX-) LG AVC-LAN communication signal - - I6-11(TX+) L AVC-LAN communication signal - - I7-36 (BCV-) - I7-35 (BGND) W - GR Front television camera ground Always Below 1 V I7-12 (BCV+) - I7-35 (BGND) R - GR Front television camera display signal input Engine switch on (IG), wide view front and side monitor switch on and camera lens is not covered, displaying an image Pulse generation
(See waveform 1)Engine switch on (IG), wide view front and side monitor switch on and camera lens is covered, blacking out the screen. Pulse generation
(See waveform 2)I7-35 (BGND) - I6-4 (GND1) GR - W-B Front television camera ground (shield) Always Below 1 Ω I7-11 (BCB+) - I7-35 (BGND) B - GR Power source to front television camera Engine switch on (IG), wide view front and side monitor switch on 5.5 to 7.05 V Using an oscilloscope, check waveform.
Text in Illustration *a Waveform 1 *b Waveform 2 *c Synchronized Signal *d Video Waveform - HINT:
- The video waveform changes according to the image sent by the front television camera assembly.
Waveform 1
Measurement Condition Item Content Terminal No. (Symbol) I7-12 (BCV+) - I7-35 (BGND) Tool Setting 200 mV/DIV., 50 μsec./DIV. Condition Engine switch on (IG), wide view front and side monitor switch on and camera lens is not covered, displaying an image Waveform 2
Measurement Condition Item Content Terminal No. (Symbol) I7-12 (BCV+) - I7-35 (BGND) Tool Setting 200 mV/DIV., 50 μsec./DIV. Condition Engine switch on (IG), wide view front and side monitor switch on and camera lens is covered, blacking out the screen.
![]() |
NAVIGATION RECEIVER ASSEMBLY (for Navigation Receiver Type) (LandCruiser RM0000011BQ0RNX.html) |
RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type) (LandCruiser RM000003YVI03JX.html) |