Dtc B1585 Usb Media Malfunction


DESCRIPTION

INSPECTION PROCEDURE

REPLACE USB DEVICE OR "iPod"

CHECK FOR DTC

DTC B1585 USB Media Malfunction


DESCRIPTION

This DTC is stored when a malfunction occurs in a connected device.

DTC Code
DTC Detection Condition
Trouble Area
B1585
Either condition is met.
  1. Non mass-storage class or incompatible protocol USB device.
  2. USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT).
  3. "iPod" malfunction.
  4. "iPod" with unsupported firmware.
  5. Unsupported "iPod" model.
  1. USB device or "iPod"
  2. Radio and display receiver assembly

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1.REPLACE USB DEVICE OR "iPod"

  1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

  1. Turn the ignition switch off.

    HINT:
    When this DTC has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.

  1. Turn the ignition switch to ACC.

  1. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

    HINT:
    1. If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
    2. Refer to System Description for compatible formats and versions (LandCruiser RM000003YVK037X.html).

NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (LandCruiser RM0000014CZ0EQX.html).

  1. Check for DTCs (LandCruiser RM0000014CZ0EQX.html).

    OK:
    No DTCs are output.


NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (LandCruiser RM000003AHY02NX.html)
OK

USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USB DEVICE OR "iPod" WAS DEFECTIVE