Tilt And Telescopic Manual Switch -- Installation |
| 1. INSTALL TILT AND TELESCOPIC SWITCH |
Attach the claw to install the tilt and telescopic switch.
Connect the connector.
| 2. INSTALL STEERING COLUMN LOWER COVER |
Install the 3 screws.
Attach the 2 claws to install the steering column lower cover.
- NOTICE:
- Do not damage the tilt and telescopic switch.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- Reset the auto tilt away function setting to the previous condition by changing the customize parameter (LandCruiser RM000004KI4013X.html).
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 4. CHECK SRS WARNING LIGHT |