Vane Pump (For 2Tr-Fe) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FAN AND GENERATOR V BELT

  3. DISCONNECT RETURN HOSE

  4. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (w/ VSC)

  5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (w/o VSC)

  6. REMOVE VANE PUMP ASSEMBLY (w/ VSC)

  7. REMOVE VANE PUMP ASSEMBLY (w/o VSC)

Vane Pump (For 2Tr-Fe) -- Removal


NOTICE:
  1. When using a vise, do not overtighten it.
  2. When installing the parts indicated by arrows, coat them with power steering fluid (LandCruiser RM000004ZZ3005X.html).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


2. REMOVE FAN AND GENERATOR V BELT


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Use the hexagonal part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

    NOTICE:
    When removing the fan and generator V belt, do not use the bolt of the idle pulley.
    HINT:
    After removing the fan and generator V belt, move the tensioner upward to the maximum amount.


3. DISCONNECT RETURN HOSE


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the clip and disconnect the hose.



4. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (w/ VSC)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 2 connectors.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Power Assist Systems.Power Steering System (W/ Vsc).Vane Pump (For 2Tr-Fe) Removal

  1. Remove the union bolt and disconnect the pressure feed tube from the vane pump.

  1. Remove the gasket from the pressure feed tube.



5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (w/o VSC)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Power Assist Systems.Power Steering System (W/ Vsc).Vane Pump (For 2Tr-Fe) Removal

  1. Remove the union bolt and disconnect the pressure feed tube from the vane pump.

  1. Remove the gasket from the pressure feed tube.



6. REMOVE VANE PUMP ASSEMBLY (w/ VSC)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and vane pump.



7. REMOVE VANE PUMP ASSEMBLY (w/o VSC)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Power Assist Systems.Power Steering System (W/ Vsc).Vane Pump (For 2Tr-Fe) Removal

  1. Disconnect the connector from the power steering oil pressure switch.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Power Assist Systems.Power Steering System (W/ Vsc).Vane Pump (For 2Tr-Fe) Removal

  1. Remove the 2 bolts and vane pump.