Rear Differential Lock Position Switch Inspection
INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH
Rear Differential Lock Position Switch -- Inspection |
1. INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
1 (GND) - 2 (+B)
| Pushed
| Below 1 Ω
|
Released
| 100 kΩ or higher
|
Text in Illustration*a
| Component without harness connected (Rear Differential Lock Position Switch)
|
*b
| Pushed
|
*c
| Released
|
- If the result is not as specified, replace the rear differential lock position switch.