Park / Neutral Position Switch Adjustment

w/ ATF Warmer:
Remove the bolt and wire harness clamp bracket from the transmission insulator RH.

1. Remove the 2 bolts and transmission insulator RH from the automatic transmission assembly.
   

w/o ATF Warmer:

1. Remove the 3 bolts and transmission insulator RH from the automatic transmission assembly.
   

While pushing the shift lock release button, move the shift lever to N.

Remove the bolt of the park/neutral position switch assembly.

Clean the bolt and bolt hole.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

Align the neutral basic line with the groove as shown in the illustration.

Hold the park/neutral position switch assembly in position and install the bolt.

Torque:

13 N*m{131 kgf*cm, 9 ft.*lbf}

After the adjustment, perform the park/neutral position switch assembly operation check.
(LandCruiser RM000000OD501IX_01_0001.html)

w/ ATF Warmer:

1. Install the transmission insulator RH to the automatic transmission assembly with the 2 bolts.
   

   Torque:

   14 N*m{143 kgf*cm, 10 ft.*lbf}

2. Install the wire harness clamp bracket from the transmission insulator RH with the bolt.
   

   Torque:

   13 N*m{127 kgf*cm, 9 ft.*lbf}

w/o ATF Warmer:

1. Install the transmission insulator RH to the automatic transmission assembly with the 3 bolts.
   

   Torque:

   14 N*m{143 kgf*cm, 10 ft.*lbf}