Oil Pressure Switching Valve Inspection


  1. INSPECT OIL PRESSURE SWITCHING VALVE ASSEMBLY

Oil Pressure Switching Valve -- Inspection



1. INSPECT OIL PRESSURE SWITCHING VALVE ASSEMBLY

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		13 to 17 Ω
    If the result is not as specified, replace the oil pressure switching valve assembly.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Kd-Ftv Lubrication.Lubrication System.Oil Pressure Switching Valve Inspection

  1. Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check that the operating sound of the oil pressure switching valve can be head.

    NOTICE:
    1. These tests must be performed within 10 seconds to prevent the coil from burning out.
    2. Always turn the voltage on and off on the battery side, not the oil pressure switching valve side.
    If the result is not as specified, replace the oil pressure switching valve.