Intake Manifold -- Installation |
| 1. INSTALL INTAKE MANIFOLD |
Install the purge line hose to the intake manifold, and slide the clip to secure the hose.
Install the 2 wire harness clamp brackets to the intake manifold with the 2 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Install the intake manifold insulator to the intake manifold.
- HINT:
- Insert the protrusions of the intake manifold insulator into the grille of the intake manifold.
- NOTICE:
- Insert the intake manifold insulator until the position of the line as shown in the illustration.
Text in Illustration *1 Intake Manifold Insulator *a Line
 |
Install a new gasket to the intake manifold.
 |
Install the intake manifold with the 5 bolts and 2 nuts.
- Torque:
- 25 N*m{255 kgf*cm, 18 ft.*lbf}
Install the 2 No. 2 intake manifold insulators to the intake manifold.
Connect the No. 3 ventilation hose to the intake manifold, and slide the clip to secure the hose.
Attach the No. 2 water by-pass hose to the intake manifold.
Attach the 2 wire harness clamps to the 2 wire harness clamp brackets.
| 2. INSTALL PURGE VSV |
Install the purge VSV with the bolt.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
Connect the 2 purge line hoses to the purge VSV.
Connect the purge VSV connector.
| 3. INSTALL FUEL DELIVERY PIPE WITH FUEL INJECTOR |
| 4. INSTALL THROTTLE WITH MOTOR BODY ASSEMBLY |
| 5. INSTALL STARTER ASSEMBLY |
- for 1.4 kW Type: (LandCruiser RM000003REW00OX.html)
- for 2.0 kW Type: (LandCruiser RM00000179J00VX.html)
| 6. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH |
Install the front No. 1 fender apron to frame seal LH with the 5 clips.
| 7. INSTALL FRONT FENDER APRON SEAL LH |
Install the front fender apron seal LH with the 5 clips.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).