Exhaust Pipe -- Removal |
| 1. REMOVE TAILPIPE ASSEMBLY |
Remove the 2 bolts and disconnect the tailpipe assembly from the exhaust pipe support.
Remove the gasket.
| 2. REMOVE NITROGEN OXIDES SENSOR (w/ Urea SCR System) |
| 3. REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR (w/ Urea SCR System) |
Disconnect the connector from the No. 4 exhaust gas temperature sensor.
 |
Detach the 2 clamps and disconnect the No. 4 exhaust gas temperature sensor from the sensor bracket.
 |
Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor from the center exhaust pipe assembly.
 |
| 4. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
for 3 Door:
Remove the 2 bolts and then disconnect the center exhaust pipe assembly from the 2 exhaust pipe supports.
for 5 Door:
Remove the 2 bolts and then disconnect the center exhaust pipe assembly from the 3 exhaust pipe supports.
Remove the gasket.
| 5. REMOVE UREA INJECTOR SET (w/ Urea SCR System) |
| 6. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the exhaust pipe supports.
w/ Urea SCR System:
Using a 14 mm union nut wrench, loosen the 2 bolts, 2 compression springs and front exhaust pipe assembly.
w/o Urea SCR System:
Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.
Remove the gasket.