Fuel Pump (For Double Tank Type) Installation

Apply a light coat of diesel fuel or grease to a new gasket and install the gasket to the fuel tank sub-assembly.

Align the protrusion of the fuel suction with pump and gauge tube assembly with the groove of the fuel tank sub-assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.

Install the fuel suction with pump and gauge tube assembly to the fuel tank sub-assembly.

Put a new retainer on the fuel tank sub-assembly. While holding the fuel suction with pump and gauge tube assembly, tighten the retainer one complete turn by hand.

HINT:

Make sure the start marks on the retainer and fuel tank sub-assembly are aligned and then tighten the retainer.

Set SST on the retainer.

SST

09808-14030

HINT:

1. Hold the fuel suction with pump and gauge tube assembly upright by hand to ensure that the gasket is not moved out of position.
   
2. Engage the claws of SST securely with the retainer holes to secure SST.
   
3. Install SST while pressing the claws of SST against the retainer (toward the center of SST).
   

Using SST, tighten the retainer until the mark on the retainer is within range A on the fuel tank sub-assembly as shown in the illustration.

SST

09808-14030

HINT:

Fit the tips of SST onto the ribs of the retainer.