Drive Belt Installation


  1. INSTALL FAN AND GENERATOR V BELT

Drive Belt -- Installation



1. INSTALL FAN AND GENERATOR V BELT


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gr-Fe Engine Mechanical.Engine.Drive Belt Installation

  1. Set the V belt onto every part.

    Text in Illustration
    *1
    		Vane Pump
    *2
    		Water Pump
    *3
    		No. 2 Idler
    *4
    		Generator
    *5
    		Cooler Compressor or Idler Pulley
    *6
    		No. 1 Idler
    *7
    		Crankshaft
    *8
    		V-ribbed Belt Tensioner

  1. While turning the belt tensioner counterclockwise, remove the pin.

    NOTICE:
    Make sure that the V belt is properly installed to each pulley.

  1. Check that the belt fits properly in the ribbed grooves.

    HINT:
    Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.