Heated Oxygen Sensor Installation

Using SST, install the heated oxygen sensor.

SST

09224-00011

Torque:

Specified tightening torque:

44 N*m{449 kgf*cm, 32 ft.*lbf}

HINT:

1. Make sure SST and the wrench are connected in a straight line.
   
2. Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (LandCruiser RM000003YMD00TX.html).
   
3. When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (384 kgf*cm, 28 ft.*lbf)
   

Attach the wire harness clamp.

Connect the heated oxygen sensor connector.