Camshaft Position Sensor -- Installation |
| 1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side) |
Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
Install the camshaft position sensor with the bolt.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
- NOTICE:
- When reusing the camshaft position sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.
Connect the camshaft position sensor connector.
| 2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side) |
Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
Install the camshaft position sensor with the bolt.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
- NOTICE:
- When reusing the camshaft position sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.
Connect the camshaft position sensor connector.
| 3. INSTALL INTAKE AIR CONNECTOR |
Install the intake air connector with the 3 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Tighten the hose clamp.
- Torque:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
Connect the vacuum hose.
Connect the No. 2 ventilation hose.
Connect the vacuum hose to the air pressure sensor.
Connect the air pressure sensor connector.
Attach the wire harness and vacuum hose to the intake air connector.
| 4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE |
Install the air cleaner cap sub-assembly with air cleaner hose and align its matchmark with the matchmark of the intake air connector as shown in the illustration.
Text in Illustration *a Upper *b Front *c Matchmark
 |
Tighten the hose clamp.
- NOTICE:
- Check that the air cleaner hose is securely installed.
Attach the 4 clamps.
Attach the 3 clamps and connect the intake mass air flow meter connector.