Intake Air Temperature Sensor Inspection


  1. INSPECT INTAKE AIR TEMPERATURE SENSOR

Intake Air Temperature Sensor -- Inspection



1. INSPECT INTAKE AIR TEMPERATURE SENSOR


  1. Measure the resistance according to the value(s) in the table below.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Gd-Ftv Engine Control.Ecd System.Intake Air Temperature Sensor Inspection


    Text in Illustration
    *a
    		Component without harness connected
    (Intake Air Temperature Sensor)
    		*b
    		Resistance
    *c
    		Temperature
    		*d
    		Acceptable Range
    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		2.21 to 2.65 kΩ
    60°C (140°F)
    		0.54 to 0.62 kΩ
    CAUTION:
    1. Do not put your hands in the water warmed up during the inspection.
    2. Touching the hot water may result in burns.
    NOTICE:
    When checking the intake air temperature sensor in water, do not allow water to contact the terminals. After completing the check, dry the intake air temperature sensor.
    If the result is not as specified, replace the intake air temperature sensor.