Roof Drip Side Finish Moulding Removal


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

Roof Drip Side Finish Moulding -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Exterior.Roof Drip Side Finish Moulding.Roof Drip Side Finish Moulding Removal

  1. Put protective tape around the edges of the moulding.

  1. Using a moulding remover, remove the moulding's front and rear ends from the vehicle body clips.

    NOTICE:
    1. Do not remove the clips from the vehicle body.
    2. If the clips are damaged or removed accidentally, replace them.