Hood On-Vehicle Inspection


  1. INSPECT HOOD SUB-ASSEMBLY

Hood -- On-Vehicle Inspection



1. INSPECT HOOD SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to F are within the standard range.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Engine Hood Door.Hood.Hood On-Vehicle Inspection


    Standard:

    Area
    		Specified Condition
    		Area
    		Specified Condition
    A
    		3.5 to 6.5 mm (0.139 to 0.256 in.)
    		D
    		-1.2 to 1.8 mm (-0.0472 to 0.0709 in.)
    B
    		-0.8 to 2.2 mm (-0.0315 to 0.0866 in.)
    		E
    		3.5 to 6.5 mm (0.139 to 0.256 in.)
    C
    		2.5 to 5.5 mm (0.0984 to 0.217 in.)
    		F
    		-0.8 to 2.2 mm (-0.0315 to 0.0866 in.)