Front Power Seat Motor Assembly (For Rear Lifter) Removal

Apply protective tape around the front seat cushion shield.

Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

HINT:

Tape the screwdriver tip before use.

Apply protective tape around the front seat cushion shield.

Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

HINT:

Tape the screwdriver tip before use.

Remove the 2 screws.

Remove the 3 screws.

Detach the claw and guide.

Remove the front seat cushion shield RH with the front inner No. 1 seat cushion shield RH.

Remove the 3 screws.

Disconnect the connector and remove the front power seat switch RH.

Remove the screw.

Detach the claw and guide.

Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.

Disconnect the connector and detach the 3 clamps.

Remove the nut and front seat inner belt assembly.

Remove the buckle cover.

Remove the hog rings.

Bend the 2 front seat cushion frame claws upward.

Detach the hooks and remove the front seat cushion cover with pad.

w/o Front Seat Side Airbag:
Detach the 2 wire harness clamps.

w/ Front Seat Side Airbag:
Detach the 3 wire harness clamps.

Detach the 4 clamps indicated by the arrows in the illustration and remove the seat cushion spring.

Remove the 4 bolts and seat cushion frame.

Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts for the tilt rod.

Remove the nut and tilt rod.

Disconnect the connector.

Using a T40 "TORX" socket wrench, remove the "TORX" bolt for the adjust screw.

Using a 4 mm socket hexagon wrench, remove the 2 bolts and power seat motor assembly (for Rear Lifter).

HINT:

When the adjust screw is locked in the uppermost or lowermost position, turn the adjust screw to release the lock before removing the power seat motor assembly.