Rear No. 1 Seat Assembly (For Lh Side) Disassembly

Remove the screw and release handle.

Remove the screw.

Using a screwdriver, detach the 4 claws and remove the reclining cover.

HINT:

Tape the screwdriver tip before use.

Remove the screw.

Using a screwdriver, detach the 3 claws and remove the reclining cover.

HINT:

Tape the screwdriver tip before use.

Remove the 4 bolts and seatback.

Using a screwdriver, detach the hooks.

Open the zipper.

Roll up the seatback cover.

Detach the 4 claws and remove the 2 headrest supports.

Remove the seatback cover (with pad) from the seatback frame.

Remove the 2 hog rings and the seatback cover from the seatback pad.

Remove the bolt and belt.

Remove the screw and the reclining remote control lever knob.

Remove the 7 screws.

Raise the lock cover and remove the rear seat lock control cable from the lock cover's claw. Then remove the lock cover.

Remove the 2 screws and lock cover.

Remove the 2 nuts and hinge.

Remove the 2 nuts and hinge.

Remove the seat track adjusting handle.

Remove the release handle from the rear seat lock through the hole in the rear seat cushion under cover.

Using a screwdriver, remove the support spring.

HINT:

Tape the screwdriver tip before use.

Disconnect the lock control cable from the seat track.

Using a T40 "torx" socket, remove the 2 "torx" bolts and lock (together with the lock control cable).

Remove the E-ring, plate and lock control cable from the lock.

Using a screwdriver, remove the support spring and disconnect the lock control cable as shown in the illustration.

HINT:

Tape the screwdriver tip before use.

Using a T40 "torx" socket, remove the 2 "torx" bolts, plate and lock.

Using a T40 "torx" socket, remove the 2 "torx" bolts and bracket.

Lift up the seat track adjusting handle and move the seat track to the foremost position.

Using a T40 "torx" socket, remove the 4 "torx" bolts.

Lift up the seat track adjusting handle and move the seat track to the rearmost position.

Using a screwdriver, push down the handle stopper and detach the claws. Then remove the seat track adjusting handle.

Using a T40 "torx" socket, remove the 2 "torx" bolts and seat cushion from the 2 seat tracks.

Using a screwdriver, detach the 8 claws and hooks.

HINT:

Tape the screwdriver tip before use.

Remove the under cover from the seat cushion cover. Then hold back the seat cushion cover so that the 5 screws are visible.

Remove the 5 screws.

Detach the 2 claws and remove the under cover.

Remove the seat cushion cover (with pad) from the seat cushion frame.

Remove the 4 hog rings and seat cushion cover from the seat cushion pad.

Pull the band in the direction indicated by the black arrow in the illustration. Then remove the band.