Front Seat Assembly (W/ Front Seat Side Airbag) -- Installation |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors under the seat.
- NOTICE:
- Be careful not to damage the airbag wire harness or connector.
Temporarily install the front seat assembly with the 4 bolts.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
Lift up the seat track adjusting handle and move the seat to the foremost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
| 2. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest.
| 3. INSTALL OUTER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
 |
| 4. INSTALL INNER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
 |
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).
| 6. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Toyota Fortuner RM000000XFD06DX.html).