Outer Rear View Mirror Inspection


  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Retract Mirror)

  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Retract Mirror)

  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Retract Mirror)

  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Retract Mirror)

Outer Rear View Mirror -- Inspection



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Retract Mirror)


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 5 (MV)
    Battery negative (-) → Terminal 3 (M+)
    		Turns upward (A)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 5 (MV)
    		Turns downward (B)
    Battery positive (+) → Terminal 1 (MH)
    Battery negative (-) → Terminal 3 (M+)
    		Turns left (C)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 1 (MH)
    		Turns right (D)
    If the result is not as specified, replace the mirror assembly.


2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Retract Mirror)


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 5 (MV)
    Battery negative (-) → Terminal 3 (M+)
    		Turns upward (A)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 5 (MV)
    		Turns downward (B)
    Battery positive (+) → Terminal 1 (MH)
    Battery negative (-) → Terminal 3 (M+)
    		Turns left (C)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 1 (MH)
    		Turns right (D)
    If the result is not as specified, replace the mirror assembly.


3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Retract Mirror)


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 5 (MV)
    Battery negative (-) → Terminal 3 (M+)
    		Turns upward (A)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 5 (MV)
    		Turns downward (B)
    Battery positive (+) → Terminal 1 (MH)
    Battery negative (-) → Terminal 3 (M+)
    		Turns left (C)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 1 (MH)
    		Turns right (D)
    If the result is not as specified, replace the mirror assembly.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. w/ Retract Mirror:

    1. For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

      OK:
      Measurement Condition
      		Mirror Position
      		Specified Condition
      Battery positive (+) → Terminal 6 (MR)
      Battery negative (-) → Terminal 4 (MF)
      		Forward position (A)
      		Moves from (A) to retracted position (E)
      Battery negative (-) → Terminal 6 (MR)
      Battery positive (+) → Terminal 4 (MF)
      		Forward position (A)
      		Does not move
      Battery positive (+) → Terminal 6 (MR)
      Battery negative (-) → Terminal 4 (MF)
      		Position in range (B) between forward position (A) and driving position (C)
      		Moves from position in range (B) to retracted position (E)
      Battery negative (-) → Terminal 6 (MR)
      Battery positive (+) → Terminal 4 (MF)
      		Position in range (B) between forward position (A) and driving position (C)
      		Moves from position in range (B) to forward position (A)
      Battery positive (+) → Terminal 6 (MR)
      Battery negative (-) → Terminal 4 (MF)
      		Driving position (C)
      		Moves from (C) to retracted position (E)
      Battery negative (-) → Terminal 6 (MR)
      Battery positive (+) → Terminal 4 (MF)
      		Driving position (C)
      		Does not move
      Battery positive (+) → Terminal 6 (MR)
      Battery negative (-) → Terminal 4 (MF)
      		Position in range (D) between driving position (C) and retracted position (E)
      		Moves from position in range (D) to retracted position (E)
      Battery negative (-) → Terminal 6 (MR)
      Battery positive (+) → Terminal 4 (MF)
      		Position in range (D) between driving position (C) and retracted position (E)
      		Moves from position in range (D) to driving position (C)
      Battery positive (+) → Terminal 6 (MR)
      Battery negative (-) → Terminal 4 (MF)
      		Retracted position (E)
      		Does not move
      Battery negative (-) → Terminal 6 (MR)
      Battery positive (+) → Terminal 4 (MF)
      		Retracted position (E)
      		Moves from (E) to driving position (C)
      NOTICE:
      1. Disconnect and reconnect the battery between each mirror position check.
      2. Do not apply battery voltage when moving the mirror by hand into each mirror position.
      If the result is not as specified, replace the mirror assembly.


4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Retract Mirror)


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check the operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 5 (MV)
    Battery negative (-) → Terminal 3 (M+)
    		Turns upward (A)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 5 (MV)
    		Turns downward (B)
    Battery positive (+) → Terminal 1 (MH)
    Battery negative (-) → Terminal 3 (M+)
    		Turns left (C)
    Battery positive (+) → Terminal 3 (M+)
    Battery negative (-) → Terminal 1 (MH)
    		Turns right (D)
    If the result is not as specified, replace the mirror assembly.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Rear View Mirror.Outer Rear View Mirror Inspection

  1. w/ Retract Mirror:
    For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

    OK:
    Measurement Condition
    		Mirror Position
    		Specified Condition
    Battery positive (+) → Terminal 6 (MR)
    Battery negative (-) → Terminal 4 (MF)
    		Forward position (A)
    		Moves from (A) to retracted position (E)
    Battery negative (-) → Terminal 6 (MR)
    Battery positive (+) → Terminal 4 (MF)
    		Forward position (A)
    		Does not move
    Battery positive (+) → Terminal 6 (MR)
    Battery negative (-) → Terminal 4 (MF)
    		Position in range (B) between forward position (A) and driving position (C)
    		Moves from position in range (B) to retracted position (E)
    Battery negative (-) → Terminal 6 (MR)
    Battery positive (+) → Terminal 4 (MF)
    		Position in range (B) between forward position (A) and driving position (C)
    		Moves from position in range (B) to forward position (A)
    Battery positive (+) → Terminal 6 (MR)
    Battery negative (-) → Terminal 4 (MF)
    		Driving position (C)
    		Moves from (C) to retracted position (E)
    Battery negative (-) → Terminal 6 (MR)
    Battery positive (+) → Terminal 4 (MF)
    		Driving position (C)
    		Does not move
    Battery positive (+) → Terminal 6 (MR)
    Battery negative (-) → Terminal 4 (MF)
    		Position in range (D) between driving position (C) and retracted position (E)
    		Moves from position in range (D) to retracted position (E)
    Battery negative (-) → Terminal 6 (MR)
    Battery positive (+) → Terminal 4 (MF)
    		Position in range (D) between driving position (C) and retracted position (E)
    		Moves from position in range (D) to driving position (C)
    Battery positive (+) → Terminal 6 (MR)
    Battery negative (-) → Terminal 4 (MF)
    		Retracted position (E)
    		Does not move
    Battery negative (-) → Terminal 6 (MR)
    Battery positive (+) → Terminal 4 (MF)
    		Retracted position (E)
    		Moves from (E) to driving position (C)
    NOTICE:
    1. Disconnect and reconnect the battery between each mirror position check.
    2. Do not apply battery voltage when moving the mirror by hand into each mirror position.
    If the result is not as specified, replace the mirror assembly.