Power Window Control System (W/ Jam Protection Function) Front Passenger Side Power Window Manual Function Does Not Operate With Front Passenger Side Power Window Switch


DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE] - BATTERY)

INSPECT FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR FRONT PASSENGER SIDE)

CHECK HARNESS AND CONNECTOR (FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE] - FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY [FOR FRONT PASSENGER SIDE])

INSPECT FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (FOR FRONT PASSENGER SIDE)

CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE])

POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function) - Front Passenger Side Power Window Manual Function does not Operate with Front Passenger Side Power Window Switch


DESCRIPTION

If the front passenger side manual up/down function does not operate, a malfunction may be present in the front door window regulator sub-assembly (for front passenger side), front power window regulator switch assembly (for front passenger side), power window regulator master switch assembly or wire harness.

WIRING DIAGRAM


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Windshield Windowglass.Power Window Control System (W/ Jam Protection Function).Power Window Control System (W/ Jam Protection Function) Front Passenger Side Power Window Manual Function Does Not Operate With Front Passenger Side Power Window Switch


INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.CHECK HARNESS AND CONNECTOR (FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE] - BATTERY)


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Windshield Windowglass.Power Window Control System (W/ Jam Protection Function).Power Window Control System (W/ Jam Protection Function) Front Passenger Side Power Window Manual Function Does Not Operate With Front Passenger Side Power Window Switch

  1. Disconnect the P11 front power window regulator switch assembly (for front passenger side) connector.

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    P11-3 (B) - Body ground
    		Ignition switch ON
    		11 to 14 V
    Ignition switch off
    		Below 1 V
    Text in Illustration
    *a
    		Front view of wire harness connector
    (to Front Power Window Regulator Switch Assembly [for Front Passenger Side])


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.INSPECT FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR FRONT PASSENGER SIDE)


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Windshield Windowglass.Power Window Control System (W/ Jam Protection Function).Power Window Control System (W/ Jam Protection Function) Front Passenger Side Power Window Manual Function Does Not Operate With Front Passenger Side Power Window Switch

  1. Remove the front power window regulator switch assembly (for front passenger side) (Toyota Fortuner RM000004ROS005X.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    5 (D) - 4 (SD)
    2 (U) - 3 (B)
    		UP
    		Below 1 Ω
    5 (D) - 4 (SD)
    2 (U) - 1 (SU)
    		OFF
    		Below 1 Ω
    5 (D) - 3 (B)
    2 (U) - 1 (SU)
    		DOWN
    		Below 1 Ω


NG
REPLACE FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR FRONT PASSENGER SIDE) (Toyota Fortuner RM000004ROS005X.html)
OK


3.CHECK HARNESS AND CONNECTOR (FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE] - FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY [FOR FRONT PASSENGER SIDE])

  1. Disconnect the P11 front power window regulator switch assembly (for front passenger side) connector.

  1. Disconnect the P8*1 or P7*2 front door window regulator sub-assembly (for front passenger side) connector.

    1. *1: for LHD
    2. *2: for RHD

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for LHD
    Tester Connection
    		Condition
    		Specified Condition
    P11-5 (D) - P8-1
    		Always
    		Below 1 Ω
    P11-2 (U) - P8-2
    		Always
    		Below 1 Ω
    P11-5 (D) or P8-1 - Body ground
    		Always
    		10 kΩ or higher
    P11-2 (U) or P8-2 - Body ground
    		Always
    		10 kΩ or higher
    for RHD
    Tester Connection
    		Condition
    		Specified Condition
    P11-5 (D) - P7-1
    		Always
    		Below 1 Ω
    P11-2 (U) - P7-2
    		Always
    		Below 1 Ω
    P11-5 (D) or P7-1 - Body ground
    		Always
    		10 kΩ or higher
    P11-2 (U) or P7-2 - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


4.INSPECT FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (FOR FRONT PASSENGER SIDE)


  1. Remove the front door window regulator sub-assembly (for front passenger side) (Toyota Fortuner RM000004ROS005X.html).


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Windshield Windowglass.Power Window Control System (W/ Jam Protection Function).Power Window Control System (W/ Jam Protection Function) Front Passenger Side Power Window Manual Function Does Not Operate With Front Passenger Side Power Window Switch


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD
    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50
    		Up
    		Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50
    		Down

  1. Apply battery voltage to connector terminals 1 and 2.

    NOTICE:
    Do not apply battery voltage to any terminals except terminals 1 and 2.

  1. Check that the arm of window regulator rotates smoothly as follows.

    OK:
    for LHD
    Measurement Condition
    		Specified Condition
    Battery positive (+) → 2
    Battery negative (-) → 1
    		Arm of window regulator rotates counterclockwise (Up)
    Battery positive (+) → 1
    Battery negative (-) → 2
    		Arm of window regulator rotates clockwise (Down)
    for RHD
    Measurement Condition
    		Specified Condition
    Battery positive (+) → 2
    Battery negative (-) → 1
    		Arm of window regulator rotates clockwise (Up)
    Battery positive (+) → 1
    Battery negative (-) → 2
    		Arm of window regulator rotates counterclockwise (Down)


NG
REPLACE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (FOR FRONT PASSENGER SIDE) (Toyota Fortuner RM000004ROS005X.html)
OK


5.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR SWITCH ASSEMBLY [FOR FRONT PASSENGER SIDE])

  1. Disconnect the P6 power window regulator master switch assembly connector.

  1. Disconnect the P11 front power window regulator switch assembly (for front passenger side) connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    P6-13 (U) - P11-1 (SU)
    		Always
    		Below 1 Ω
    P6-15 (D) - P11-4 (SD)
    		Always
    		Below 1 Ω
    P6-13 (U) or P11-1 (SU) - Body ground
    		Always
    		10 kΩ or higher
    P6-15 (D) or P11-4 (SD) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (Toyota Fortuner RM000004ROS005X.html)