Meter / Gauge System Terminals Of Ecu

  1. CHECK COMBINATION METER ASSEMBLY

  1. CHECK ACCESSORY METER ASSEMBLY (MULTI-DISPLAY)

Meter / Gauge System -- Terminals Of Ecu



CHECK COMBINATION METER ASSEMBLY

Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu

  1. Disconnect the C10 and C11 meter connectors.

  2. Measure the voltage and resistance of the wire harness side connectors.

    Terminal No.
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    C10-1 - Body ground
    R - Body ground
    Battery
    Always
    10 to 14 V
    C10-21 - C10-22
    B-O - Y
    Ignition signal
    Ignition switch ON
    10 to 14 V
    Ignition switch OFF
    Below 1 V
    C11-11 - Body ground*
    B-R - Body ground
    Power supply for fuel consumption calculation
    Ignition switch ON
    10 to 14 V
    Ignition switch OFF
    Below 1 V
    C10-22 - Body ground
    Y - Body ground
    Ground
    Always
    Below 1 Ω
    C10-9 - Body ground
    W-G - Body ground
    Rheostat signal
    Rheostat knob fully turned to left position
    702 Ω
    Rheostat knob fully turned to right position
    Below 1 Ω
    HINT:
    *: 1GR-FE
    If the result is not as specified, there may be a malfunction on the wire harness side.
  3. Reconnect the C10 and C11 meter connectors.

  4. Measure the voltage of the connectors.

    Terminal No.
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    C10-2 - C10-3
    BR - BR-Y
    Fuel level signal
    Ignition switch ON,
    fuel level F
    Below 1 V
    Ignition switch ON,
    fuel level E
    4 to 7 V
    C10-5 - Body ground
    P-L - Body ground
    Vehicle speed signal (input)
    Ignition switch ON,
    slowly turn wheel
    Pulse generation
    (see waveform 1)
    C10-6 - Body ground
    V-R - Body ground
    Vehicle speed signal (output)
    Vehicle is driven
    Pulse generation
    (see waveform 1)
    C10-7 - Body ground
    B-W - Body ground
    Water temperature signal
    Engine running
    Pulse generation
    (see waveform 2)
    C10-8 - C10-22
    G - Y
    Light control switch signal
    Light control switch is OFF
    Below 1 V
    Light control switch is TAIL or HEAD
    10 to 14 V
    C10-10 - Body ground
    G-Y - Body ground
    Unlock warning switch signal
    No key in ignition key cylinder
    Below 1 V
    Ignition switch OFF,
    key is in ignition key cylinder
    10 to 14 V
    C10-11 - Body ground
    R-Y - Body ground
    Driver side seat belt warning signal
    Ignition switch ON,
    driver side seat belt unfastened
    Below 1 V
    Ignition switch ON,
    driver side seat belt fastened
    10 to 14 V
    C10-12 - C10-13*1
    G-B - W-G
    Unengaged park warning signal
    Ignition switch ON,
    A/T shift lever on P,
    transfer shift lever not on P
    10 to 14 V
    Ignition switch ON,
    A/T shift lever on P,
    transfer shift lever on P
    Below 1 V
    C10-14 - Body ground*2
    W-G - Body ground
    Fuel filter warning signal
    Ignition switch ON,
    fuel system warning light OFF
    Below 1 V
    Ignition switch ON,
    fuel system warning light ON
    10 to 14 V
    C10-15 - Body ground
    R-B - Body ground
    Driver side door signal (output)
    Driver side door is closed
    Below 1 V
    Driver side door is open
    10 to 14 V
    C10-16 - Body ground
    R-B - Body ground
    Driver side door signal (input)
    Driver side door is closed
    Below 1 V
    Driver side door is open
    10 to 14 V
    C10-17 - Body ground
    R-L - Body ground
    Door signal
    All doors are closed
    Below 1 V
    All doors are open
    10 to 14 V
    C10-18 - Body ground*1
    P - Body ground
    ATF temperature warning signal
    Ignition switch ON,
    ATF temperature warning light ON
    Below 1 V
    Ignition switch ON,
    ATF temperature warning light OFF
    10 to 14 V
    C10-20 - Body ground
    B-Y - Body ground
    SRS warning light signal
    Ignition switch ON,
    SRS warning light OFF
    Pulse generation
    (see waveform 3)
    Ignition switch ON,
    SRS warning light ON
    Pulse generation
    (see waveform 4)
    C10-23 - Body ground*2
    L-R - Body ground
    Sedimenter warning signal
    Ignition switch ON,
    fuel system warning light OFF
    Below 1 V
    Ignition switch ON,
    fuel system warning light ON
    10 to 14 V
    C10-24 - C10-22
    G-B - Y
    Turn signal indicator LH signal
    Ignition switch ON,
    turn signal indicator LH light OFF
    Below 1 V
    Ignition switch ON,
    turn signal indicator LH light ON
    10 to 14 V
    C10-25 - C10-22
    G-Y - Y
    Turn signal indicator RH signal
    Ignition switch ON,
    turn signal indicator RH light OFF
    Below 1 V
    Ignition switch ON,
    turn signal indicator RH light ON
    10 to 14 V
    C10-27 - Body ground
    R-Y - Body ground
    HI BEAM indicator signal
    HI BEAM indicator light OFF
    10 to 14 V
    HI BEAM indicator light ON
    Below 1 V
    C10-28 - Body ground*3
    L-B - Body ground
    Cruise indicator signal
    Ignition switch ON,
    cruise control main switch OFF
    10 to 14 V
    Ignition switch ON,
    cruise control main switch ON
    Below 1 V
    C10-30 - Body ground
    G-B - Body ground
    Front fog indicator signal
    Front fog light ON
    10 to 14 V
    Front fog light OFF
    Below 1 V
    C10-31 - Body ground
    R-B - Body ground
    Center diff. lock indicator signal
    Ignition switch ON,
    transfer shift lever on H4 or L4
    10 to 14 V
    Ignition switch ON,
    transfer shift lever in position other than H4 or L4
    Below 1 V
    C10-33 - Body ground
    B - Body ground
    Rear diff. lock indicator signal
    Ignition switch ON,
    transfer indicator switch ON
    Below 1 V
    Ignition switch ON,
    transfer indicator switch OFF
    10 to 14 V
    C10-35 - Body ground
    LG-B - Body ground
    Oil pressure warning signal
    Ignition switch ON,
    oil pressure warning light OFF
    10 to 14 V
    Ignition switch ON,
    oil pressure warning light ON
    Below 1 V
    C10-36 - Body ground
    LG - Body ground
    Brake warning signal
    Ignition switch ON,
    brake warning light OFF
    10 to 14 V
    Ignition switch ON,
    brake warning light ON
    Below 1 V
    C10-37 - Body ground
    GR - Body ground
    Charge warning signal
    Ignition switch ON,
    charge warning light OFF
    10 to 14 V
    Ignition switch ON,
    charge warning light ON
    Below 1 V
    C10-38 - Body ground
    R-G - Body ground
    ABS warning indicator
    Ignition switch ON,
    ABS warning light OFF
    10 to 14 V
    Ignition switch ON,
    ABS warning light ON
    Below 1 V
    C10-39 - Body ground
    R-B - Body ground
    MIL signal
    Ignition switch ON,
    MIL OFF
    10 to 14 V
    Ignition switch ON,
    MIL ON
    Below 1 V
    C10-40 - Body ground*2
    Y-R - Body ground
    Glow indicator signal
    Ignition switch ON,
    Glow indicator light OFF
    10 to 14 V
    Ignition switch ON,
    Glow indicator light ON
    Below 1 V
    C11-1 - Body ground*4
    GR-L - Body ground
    A/T shift position signal (L)
    Ignition switch ON,
    A/T L indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T L indicator light ON
    10 to 14 V
    C11-2 - Body ground*4
    P-L - Body ground
    A/T shift position signal (2)
    Ignition switch ON,
    A/T 2 indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T 2 indicator light ON
    10 to 14 V
    C11-3 - Body ground*4
    L - Body ground
    A/T shift position signal (3)
    Ignition switch ON,
    A/T 3 indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T 3 indicator light ON
    10 to 14 V
    C11-4 - Body ground*4
    G-O - Body ground
    A/T shift position signal (4)
    Ignition switch ON,
    A/T 4 indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T 4 indicator light ON
    10 to 14 V
    C11-5 - Body ground*4
    B-R - Body ground
    A/T shift position signal (D)
    Ignition switch ON,
    A/T D indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T D indicator light ON
    10 to 14 V
    C11-6 - Body ground*4
    R-W - Body ground
    A/T shift position signal (N)
    Ignition switch ON,
    A/T N indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T N indicator light ON
    10 to 14 V
    C11-9 - Body ground*2
    G-B - Body ground
    Signal for amount of fuel consumption
    Engine running
    Pulse generation
    C11-10 - Body ground*5
    L - Body ground
    Injector signal
    Engine running
    Pulse generation
    C11-14 - Body ground*4
    R-Y - Body ground
    A/T shift position signal (R)
    Ignition switch ON,
    A/T R indicator light OFF
    Below 1 V
    Ignition switch ON,
    A/T R indicator light ON
    10 to 14 V
    HINT:
    *1: 4WD (A/T)
    *2: 1KD-FTV
    *3: w/ Cruise control system
    *4: w/ A/T shift indicator light
    *5: 1GR-FE
    If the result is not as specified, the combination meter may be malfunctioning.


  5. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu
  6. Using an oscilloscope, check the signal waveform of the meter.

    Waveform 1 (Reference)
    Item
    Content
    Terminal No.
    C10-5 - Body ground
    C10-6 - Body ground
    Tool Setting
    5 V/DIV., 10 msec./DIV.
    Vehicle Condition
    Driving at approx. 20 km/h (12 mph)
    HINT:
    As vehicle speed increases, the wavelength shortens.


  7. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu
  8. Using an oscilloscope, check the signal waveform of the meter.

    Waveform 2 (Reference)
    Item
    Content
    Terminal No.
    C10-7 - Body ground
    Tool Setting
    5 V/DIV., 10 msec./DIV.
    Vehicle Condition
    Engine idling
    HINT:
    As vehicle speed increases, the wavelength shortens.


  9. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu
  10. Using an oscilloscope, check the signal waveform of the meter.

    Waveform 3 (Reference)
    Item
    Content
    Terminal No.
    C10-20 - Body ground
    Tool Setting
    5 V/DIV., 50 msec./DIV.
    Vehicle Condition
    Ignition switch ON, SRS warning light OFF


  11. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu
  12. Using an oscilloscope, check the signal waveform of the meter.

    Waveform 4 (Reference)
    Item
    Content
    Terminal No.
    C10-20 - Body ground
    Tool Setting
    5 V/DIV., 50 msec./DIV.
    Vehicle Condition
    Ignition switch ON, SRS warning light ON

CHECK ACCESSORY METER ASSEMBLY (MULTI-DISPLAY)

Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu

  1. Disconnect the A23 meter connector.

  2. Measure the voltage and resistance of the wire harness side connector.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    +B (A23-14) - Body ground
    R - Body ground
    +B power supply
    Always
    10 to 14 V
    IG (A23-12) - Body ground
    R-B - Body ground
    IG power supply
    Ignition switch ON
    10 to 14 V
    Ignition switch OFF
    Below 1 V
    ACC (A23-13) - Body ground
    G-R - Body ground
    ACC power supply
    Ignition switch ACC
    10 to 14 V
    Ignition switch OFF
    Below 1 V
    GND1 (A23-1) - Body ground
    LG - Body ground
    Ground
    Always
    Below 1 Ω
    SGND (A23-10) - Body ground
    BR - Body ground
    If the result is not as specified, there may be a malfunction on the wire harness side.
  3. Reconnect the A23 meter connector.

  4. Measure the voltage of the connector.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    SG (A23-2) - TH+ (A23-3)
    BR-Y - W-G
    A/C ambient temperature sensor signal
    Ignition switch ON,
    ambient temperature 25°C (77°F)
    1.35 to 1.75 V
    Ignition switch ON,
    ambient temperature 40°C (104°F)
    0.85 to 2.34 V
    TAIL (A23-6) - Body ground
    G - Body ground
    Illumination signal
    Ignition switch ON,
    light control switch OFF
    Below 1 V
    Ignition switch ON,
    light control switch ON
    10 to 14 V
    If the result is not as specified, the accessory meter may be malfunctioning.

Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Meter.Meter / Gauge System.Meter / Gauge System  Terminals Of Ecu


Table of Terminal Connection
Terminal No.
Wire Harness Side
C10
1
DOME Fuse
2
Fuel Suction with Pump and Gauge Tube Assembly
3
4
ECM
5
Vehicle Speed Sensor
6
4 Pulse Output
7
ECM
8
Headlight Dimmer Switch
9
Light Control Rheostat
10
Unlock Warning Switch
11
Front Seat Inner Belt RH
12
PNP Switch*1
13
Transfer Neutral Detection Switch*2
14
Fuel Filter (Fuel Filter Switch)*3
15
Integration Relay
16
Front Door Courtesy Light Switch RH
17
Door Courtesy Light Switch
18
ECM
19
-
20
Center Airbag Sensor
21
MET Fuse
22
Body Ground
23
Fuel Filter (Fuel Sedimenter Switch)*3
24
Turn Signal Flasher Relay
25
26
-
27
Headlight Dimmer Switch
28
ECM*4
29
-
30
Front Fog Light Switch
31
Transfer Indicator Switch
32
-
33
4WD Control ECU*5
34
Engine Oil Level Sensor*3
35
Oil Pressure Switch
36
Parking Brake Switch
Brake Fluid Level Warning Switch
Vacuum Warning Switch*3
37
Generator Assembly
38
Skid Control ECU with Actuator
39
ECM (MIL)
40
ECM (GLOW)*3
C11
1
Shift Lock Control ECU*1
2
3
PNP Switch*1
4
Shift Lock Control ECU*1
5
6
PNP Switch*1
7
-
8
9
ECM*6
10
Fuel Injector Assembly*6
11
INJ Fuse
12
Accessory Meter (Multi-display)
13
14
PNP Switch*1
15
-
16
HINT:
*1: A/T
*2: 4WD (A/T)
*3: 1KD-FTV
*4: w/ Cruise control system
*5: w/ Rear differential lock system
*6: 1GR-FE