Headlight Cleaner Switch Inspection


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY

Headlight Cleaner Switch -- Inspection



1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Wiper And Washer.Headlight Cleaner Switch.Headlight Cleaner Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    3 (B) - 4 (L)
    		Headlight cleaner switch on
    		Below 1 Ω
    Headlight cleaner switch off
    		10 kΩ or higher
    Text in Illustration
    *a
    		Component without harness connected
    (Headlight Cleaner Switch Assembly)

  1. Connect the positive (+) lead of the battery to terminal 1 (ILL+) and the negative (-) lead to terminal 2 (ILL-).

  1. Check that the headlight cleaner switch assembly illumination comes on.

    OK:
    The headlight cleaner switch assembly illumination comes on.
    If the result is not as specified, replace the headlight cleaner switch assembly.