Rear Wiper Motor Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

  4. REMOVE REAR WIPER MOTOR GROMMET

  5. REMOVE REAR WIPER MOTOR ASSEMBLY

Rear Wiper Motor -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  1. Using a screwdriver, detach the 16 clips and remove the trim board.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Wiper And Washer.Rear Wiper Motor.Rear Wiper Motor Removal

  1. Detach the 2 claws and remove the cap.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the nut and arm and blade.



4. REMOVE REAR WIPER MOTOR GROMMET


5. REMOVE REAR WIPER MOTOR ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Disconnect the connector.

  1. Remove the 3 bolts and wiper motor.