Side Turn Signal Light Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

Side Turn Signal Light Assembly -- Removal


HINT:
  1. Use the same procedures for the RH and LH sides.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Lighting.Side Turn Signal Light Assembly.Side Turn Signal Light Assembly Removal

  1. Detach the 2 claws and remove the side turn signal light as shown in the illustration.

  1. Disconnect the connector and remove the side turn signal light.