Rear Airbag Sensor -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the supplemental restraint system.
| 2. REMOVE REAR SEAT ASSEMBLY |
Remove the rear seat assembly (Toyota Fortuner RM000001DOK002X.html).
| 3. REMOVE REAR DOOR SCUFF PLATE LH |
 |
Detach the 7 claws and 2 clips, and remove the rear door scuff plate.
| 4. REMOVE REAR DOOR OPENING TRIM LH |
Remove the rear door opening trim.
| 5. REMOVE BACK DOOR SCUFF PLATE |
 |
Detach the 4 claws and 6 clips, and remove the back door scuff plate.
| 6. REMOVE QUARTER TRIM JACK COVER SUB-ASSEMBLY |
Remove the quarter trim jack cover.
| 7. REMOVE QUARTER INSIDE TRIM BOARD LH |
Disconnect the rear outer No. 1 seat belt anchor.
Detach the 2 claws and remove the outer lap belt anchor cover.
Remove the bolt and disconnect the anchor.
Disconnect the rear outer No. 2 seat belt anchor.
Detach the 2 claws and remove the outer lap belt anchor cover.
Remove the bolt and disconnect the anchor.
Remove the screw and quarter trim hook.
 |
Using a clip remover, remove the clip labeled A.
Detach the 6 claws and 10 clips, and remove the quarter inside trim board.
Disconnect the power point socket connector.
Remove the 2 belt hangers.
| 8. REMOVE REAR AIRBAG SENSOR LH |
Remove the bolt and rear airbag sensor.
 |
Disconnect the connector.