Steering Pad Installation


  1. INSTALL STEERING PAD ASSEMBLY

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  3. INSPECT STEERING PAD ASSEMBLY

  4. CHECK SRS WARNING LIGHT

Steering Pad -- Installation


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Toyota Fortuner RM000000YVR005X.html).


1. INSTALL STEERING PAD ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Support the steering pad with one hand as shown in the illustration.

  1. Connect the airbag connector.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.

  1. Connect the horn connector.

  1. Install the steering pad after confirming that the circumference grooves of the screws are caught on the screw case.

  1. Using a T30 "torx" socket, install the 2 screws.

    Torque:
    8.8 N*m{90 kgf*cm, 78 in.*lbf}


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


3. INSPECT STEERING PAD ASSEMBLY

  1. Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.

  1. Check that the horn sounds.



4. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (Toyota Fortuner RM000000YVX004X.html).