Brake Master Cylinder (W/O Vsc) Removal


  1. DRAIN BRAKE FLUID

  2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

Brake Master Cylinder (W/O Vsc) -- Removal


NOTICE:
Make sure to release the vacuum from the brake booster before removing the master cylinder from the brake booster,


1. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake.Brake Master Cylinder (W/O Vsc).Brake Master Cylinder (W/O Vsc) Removal

  1. for Manual Transmission:
    Disconnect the clutch reservoir tube labeled A from the master cylinder.

  1. Disconnect the brake fluid level warning switch connector labeled B.

  1. Using a union nut wrench, disconnect the 5 brake lines labeled C from the master cylinder and 3-way.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 nuts and bracket (with 3-way).

  1. Pull out the master cylinder from the brake booster.

  1. Remove the O-ring from the master cylinder.



3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

  1. Remove the screw.

  1. Remove the reservoir and 2 grommets from the master cylinder.