Front Stabilizer Bar Installation


  1. INSTALL FRONT STABILIZER BAR

  2. INSTALL FRONT NO. 1 STABILIZER BAR BUSH

  3. INSTALL FRONT STABILIZER BRACKET

  4. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

  6. INSTALL FRONT WHEEL

Front Stabilizer Bar -- Installation


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).


1. INSTALL FRONT STABILIZER BAR

  1. Install the front stabilizer bar to the vehicle body.



2. INSTALL FRONT NO. 1 STABILIZER BAR BUSH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Suspension.Front Stabilizer Bar.Front Stabilizer Bar Installation

  1. Install the 2 bushes.

    HINT:
    1. Install each bush to the outer side of the bush stopper on the stabilizer bar.
    1. Install each bush with the slit of the bush facing the vehicle front side.


3. INSTALL FRONT STABILIZER BRACKET


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the 2 brackets with the 4 bolts.

    Torque:
    48 N*m{489 kgf*cm, 35 ft.*lbf}
    HINT:
    Make sure the bracket's arrows face the front of the vehicle.


4. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the front stabilizer link assembly LH with the 2 nuts.

    Torque:
    70 N*m{714 kgf*cm, 52 ft.*lbf}
    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.


5. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.


6. INSTALL FRONT WHEEL
Torque:
105 N*m{1,071 kgf*cm, 77 ft.*lbf}